150 Years of Innovation Design-Led Technology Respect for the Environment Products that Inspire

TRACTIONBACK® - ADHESIVE FREE BACKING

The Totally New Way To Install Carpet Title Without Wet Adhesives

Milliken-Ontera has designed the most advanced, built-in system for installing modular carpet, eliminating the need for adhesives. TractionBack®  is a high friction coating, applied during manufacture, that keeps our PVC-free carpet tiles securely in place without additional floor preparation, primers, tapes, dots, or adhesives. Once installed, tiles with TractionBack®  remain stable on the floor and do not move laterally but can still be easily uplifted when access to the sub-floor is required.

Tree-frog

Tractionback®

TractionBack® is a remarkable high-friction coating that keeps our PVC-free carpet tile securely in-place without additional adhesives, floor sealers or primers. Applied during the manufacturing process, carpet tiles with TractionBack require no manipulation, additional taping, or gluing steps in the field. Ready to install out of the box makes installation, moving, or replacing Milliken carpet easier on you and the environment.

TractionBack® benefits

TractionBack-Diagram

Easy Uplift and Replacement

No Traction Loss

Tiles can be lifted and replaced multiple times without losing the traction effect. Little or no residue is left reducing or even eliminating damage to raised access floors and high-quality sub-floors.

Improves Indoor Air Quality

Faster Installation & Habitation

Eliminates VOC off-gassing typically associated with adhesives during installation and therefore allows faster carpet installation and space habitation.

Reduces Cost of Labour and Materials

No Need For Floor Pre-treatment

Eliminates the need to pre-treat the floor with wet adhesives, saving time and materials and preventing damage to the subfloor. TractionBack® also eliminates need for extra dots, adhesives, film or tape.

Allows Faster Carpet Installation

Earlier Space Occupancy

Eliminates time spent preparing the floor, spreading wet adhesive and waiting for it to dry. As a result, earlier space occupancy is possible.

TractionBack_header_hero

TRACTIONBACK® PLUS - ADHESIVE FREE BACKING

TractionBack® Plus is an adhesive-free solution designed for use if there are concerns about high moisture or should there simply be a desire to avoid moisture testing.

TractionBack® Plus combines a proprietary high-friction backing technology (TractionBack®) with the addition of connectors (applied separately). With the added connectors there is no longer a need for adhesives at the perimeter — in fact, TractionBack® Plus requires NO liquid or spray adhesives of any kind.

TractionBack® Plus is used when:

  • High moisture sites with RH levels above 85% and an adhesive-free option is preferred.
  • When perimeter adhesive and/or double-sided tape can’t be used on a TractionBack® install.
  • Can be used with hospitality and entryway products (if TractionBack® is applied).
  • Cannot be used for Luxury Vinyl Tiles.

TRACTIONBACK® PLUS BENEFITS

Moisture
No moisture testing is required for ANY install, on-grade or above-grade.
Limits
No RH OR pH limits.
Pre Time & Reliability
Non-reactive backing greatly reduces floor prep time, and eliminates adhesive failures from plasticizer migration.
Priming & Sealing
Priming and sealing is reduced or eliminated
VoCs
Eliminates the VoCs associated with sealants and adhesives.
Drying Time
Time savings — no waiting for adhesives to dry.
Connectors Instead Of Adhesive
With the added connectors there is no longer a need for adhesives at the perimeter.
Time & Cost Saving
Faster install and lower cost compared to other moisture solutions.

TractionBack® and TractionBack® Plus go hand in hand. The two systems are identical aside from the addition of connectors with TractionBack® Plus. This is significant, because it is possible to start with TractionBack® and upgrade to TractionBack® Plus should unexpected moisture concerns arise during installation.